Fix Overheating Issue in HP Laptop

Heat buildup results in serious problems for any laptop (notebook). Generally, when temperature inside the case of laptop increases above 35 degree celsius, the risk of damaging the internet components also increases. Generally the common cause of this issue is the accumulation of dust inside the device. Then internal components generate heat and the fan moves the air to cool the components to operate at normal temperatures.

Excess heat can be caused due to inadequate cooling inside the case which may result in damaging components. HP support would like to inform you the sound of fan running constantly can indicate the overheating of laptop and then you take some steps for fixing it.

1. Checking Air Flow and Heat Transfer: No air flow means no heat is transferring, so check the air vents first. The air vents can be located on the back panel and check both intake vent and outflow vents. Make sure that outflow vents are blowing hot air and intake vents are letting air in. If you don’t feel much airflow, then clean the accumulated dust by using a can of compressed air. Also, if possible, unscrew the panels where fan is located, lift it out and blow the dust out. Clean the dust from fan’s axle as well. 
2. Checking the dying batteries: There are several types of batteries and laptop’s battery can be reason behind overheating. Unanimous thing is that the batteries are not meant for storing at 100% or 0% batteries. If you have bought a laptop and always keep the charger in- never using the battery, then it can lead to decreasing the battery’s life span. Bad batteries won’t stop working all of sudden; they will slowly get less efficient and ultimately die which generate a lot of heat in the device. If you face this, then replace your battery. Model of computer and battery is required for replacing it. You can remove the overheated battery until you do not get it replaced. 
3. In some case, updating the BIOS also helps out in fixing the overheating issue or Use HP Cool Sense technology. 

If the above information doesn’t help in fixing the issue, then there may be hardware failure, you can seek help from support team to fix the issue as soon as possible. Just make call on HP support number 1-800-875-256 and get your any major or minor issue resolved. Our experts provide the best and satisfactory solutions with ease and comfort. Using the latest technologies, all tricks and techniques are advised to be performed on your HP products. So get connected to our experts for instant help.

Content Source:

Read More Blogs:

How to Increase Battery Life of an HP Laptop?
How to Maintain an HP Laptop Battery?

How To Maintain An HP Laptop Battery?

If you have been using your HP laptop for a long time then you might have been facing some power related issues right now. By that we mean the laptop might not be charging to its fullest. If this exactly is the case then we have a bad news for you, your battery is about to give up. But do not worry, better late than never! It is because there are still some ways by which you can maintain an HP laptop Battery.

Our experts of HP repair center Australia have come up with some tips using which you can not only preserve the battery, but also improve it to some extent. To that end, it is necessary to understand one basic thing: You need to know that the battery has a finite life cycle and it is dependent upon the charging and discharging cycles. Once you are well-versed with them, you can follow the below tips to improve the condition of your power bank.

1. You should not ever put the battery of your laptop in the insulating spaces. This will make sure that heat gets built up inside the component and it can be pretty detrimental to the devices health.
2. Your laptop charges the fastest when the power is turned off. It is not just a fast charging tip, it also helps with removing the intense push and pull of power that happens while you are charging your machine while in use.
3. Make sure that you do you engage in intense gaming while using while on battery power. It can run out pretty quick and that is one half of the charging cycle.
4. Prevent overheating at all costs. To that end, clean the ventilation of the system and make sure that your computer is cleaned on a regular basis.
5. Do not rely solely on battery power, it is kind of counterproductive to the whole portable nature of the laptop but bear with us, minimalist usage of the component will allow it to last longer.

In case you want more ways to preserve the power in your system. You do not have to wonder if there is an HP Technical Support Number 1-800-875-256 . The center and its experts are available for your aid at all times. If your component is past its due date, we can also provide you with better replacement options as well.

Content Source:

Read More Blogs:

1. What To Do When My HP Laptop Locks Up or Freezes?
2. How To Carefully Replace The CMOS Battery of An HP Laptop?

How to Increase Battery Life of an HP Laptop?

There are many methods through which one can maximize the battery life of the laptop. You might know some techniques but not all. Many modern systems have enough power to use for the whole day, but if the system is losing the battery more than it is used, then you have to opt some actions to remove this error.

Here’s, how to improve the laptop accumulator. In this blog, we tell you some additional suggestion to help fix this problem. Read the instructions below:

1. First of all, you have to manage battery power operatively in Windows.
2. Ensure that the battery gives the power your laptop need when you need it. You can check Power Options on the system to control the power management features.
3. Learn about the Power Options in Windows on Microsoft website. Also, learn the tips for conserving battery power on PCs.
4. Adjust the brightness of the screen to the minimum readable level. Use of maximum brightness should be only in bright sunshine only.
5. Remove all the external peripherals which are not in use. External peripherals like CD/DVD, pen drive, USB cable, PC cards, and other devices can withdraw power from the battery. So, it’s better to disconnect when not in use.
6. Decrease the speed of the processor. Fast working of the system uses more power. By cutting down the speed, you can increase the cell life of the laptop.
7. Power off the Wireless On-Off button when no longer in use. If your laptop has one, press the Wireless On-Off button to turn the display off.
8. Finally, calibrate the PC battery. For a normal use, batteries should be calibrated at least once every 3 months.

Tips: Guide for battery usage and storage are given in the HP User Guides for each model. So, you can take help from that.

These all were the steps that can be followed to maximize Hp laptop battery life. In case one faces any problem related to the system, call the technical support team i.e. Contact HP Technical Support Australia 1-800-875-256. They are always prepared to help the customers in need. The team uses technical skills to solve the issues related to HP laptop and help the customers by providing instant response. Users can be helped by means of chat support, email or by a remote phone, connect according to one’s comfort.

Content Source :

Read More Blogs

1. How to carefully replace the CMOS battery of an HP laptop?
   

How to carefully replace the CMOS battery of an HP laptop?

If you are using your computer for a long time, chances are that you have encountered a drastic problem with the CMOS battery. Unfortunately, if the computer turns out to be the HP Laptop, then replacement of this component is the only solution.

An error with the CMOS battery is represented by the constant need of resetting the data and time of your machine; this is because the battery doesn’t have enough juice to keep up with the times. Replacing it is easy, but still needs trained hands. With that in mind, if you are not afraid to get your hands dirty and are willing to disassemble your hardware, then HP Support Australia has a way.

For starters, you will need a small flathead screw to access the component, and patience. Once you are sure that you have both of them, confer with the following steps to replace the component. 

1. Turn of the system:

a. This first steps is also the most crucial. Turn off your system and unplug all the present connections. After that, turn the device upside down

2.       Detach the hard drive

a. Using the flathead screw you just gathered, unscrew the hard drive cover and remove it. Once the cover is removed, unscrew the rest of the connections to take out the HDD itself.

3.       Detach the RAM

a. At the centre of the laptop, you will notice RAM. First, you have the remove the screws that are retaining its position. The Ram cover will be removed. After that, gently press upon the retaining latches on both the sides to remove the RAM itself. Make sure that you patience as your primary tool here, because without that you might damage the system.

4.       Detach the Wireless card

a. You will now notice the wireless card. To remove it, disconnect all the cables connected to it, unscrew the retainer and pull it out from the motherboard.

5.       Detach the CMOS battery           

a. You can now easily notice a coin shaped CMOS battery. Press upon it using your index finger and the thumb by spreading it along the clips and unclipping it. After the clips are gone, you can just list the CMOS battery upwards.

Once you have removed the component, you have to put in a replacement and put the hardware back together again.

This process is easy to follow but is a little iffy on the implementation part. Therefore, make sure you let experts handle it. For assistance, you can contact our experts via the toll-free HP technical support Australia 1-800-875-256. Our experts will not only help you with the replacement, but they also have access to troubleshoot pertaining to any problem related to your system hardware or software.